Serial Setup - Xerox 6030 User Manual

Static Routing
ON
ROUTING TABLE
ADD
Dest. Address
123. 000. 000. 000
Router Address
123. 000. 000. 000

Serial Setup

PORT SETTING
SERIAL
SERIAL
Baud Rate
3.2 Communication Parameter Setup (Printer Control Panel, 6030/6050)
*
Adding items to the routing table
1. Select [ON] for [Static Routing], and then
press the <Set> key.
Now press the <
2. Select [ADD] for the [ROUTING TABLE],
and then press the <
3. Enter the destination address, and then
press the <Set> key.
After setting up the destination address,
move the cursor to the right-hand side
and press the <
4. Enter the routing address, and then press
the <Set> key.
To return to the previous menu, move
the cursor to the left-hand side and
press the <
1
Display [SERIAL] on the setup item
selection screen, and then press the <
key.
2
Select the item that is to be set up with the
use of the < > and < > keys, and then
press the < > key.
[Handshake], [Baud Rate], [Parity], [Data
Bit], [Stop Bit], [EOP Timeout], [Output
Response], and [Job Separation] will be
displayed in that order.
> key.
> key.
> key.
> key.
>
71