Command List - Xerox 6030 User Manual

Appendix 2 HP-GL/HP-GL2 Command List
This section explains the HP-GL and HP-GL/2 command support status that are
unique to the 6030/6050 Wide Format.
y
y*
n

Command List

The following table shows the HP-GL and HP-GL/2 command support status.
Com-
Command Meaning and action
mand
AA Plots a circle around a point specified by
absolute coordinates.
AC Specifies the starting point of a fill pattern.
AD Specifies a substitute font for labels.
[Only vector fonts supported]
AF Feeds paper by one page. [Interpreted as output
trigger]
AH Feeds paper by a half page. [Interpreted as
output trigger]
AP Deselects pen cap timeout setting
AR Plots a circle around a point specified by relative
coordinates.
AS Specifies the pen acceleration.
AT Plots an arc linking three points specified by
absolute coordinates. (start point - intermediate
point - end point)
BL Enters a specified character string into a buffer.
4
(6030/6050)
Command fully supported.
Activates different actims from other ordinary commands. (Meaning in
[ ])
Command not supported and ignored.
HP-GL HP-GL/2
y y
y
y
y
y
y
y y
y
y
y
6030/6050
Wide Format
y
y
y
y*
y*
n
y
n
y
y
Appendixes