Message Area - Xerox 2101 User Manual

● Each feature is at factory setting. This default setting can be changed in the Tools Mode. For details, refer to "8.3 Setting Tools
Mode".
■
Copier Screen

Message Area

● Message area
Displays messages like machine status and operation guide.
● Tab
Select by touching the various tabs like Basic Features, Added Features, Image Quality, Output Format,
and Others to display their corresponding screens.
● Stored Job Templates button
Touch this button to display the Stored Job Templates screen.
● Document count
Displays the number of documents being scanned.
● The maximum number of originals that can be scanned is 1,000 (A4-sized) sheets. However, depending on the document size,
error messages may appear on the display before the number of documents reaches 1,000 sheets.
● No. of copies
Indicates the number of sets of copies to make. Enter a value by using the keypad. You can set a value
between 1 to 9,999. To reset the value to "1", press the C button.
● Selection buttons
Once touched, the button will be highlighted.
"..." indicates that there are more setting screens following.
Tab
Selection button
1.3 Using the Touch Panel Display
Document Count
Number of copies
Stored Job Templates button
17