Electrical Supply; Operator Accessible Areas; Cleaning Your Product - Xerox 6030 User Manual

PLEASE NOTE: YOU MUST ENSURE THAT YOUR XEROX EQUIPMENT IS SAFE AT ALL TIMES
This product shall be operated from the type of electrical supply indicted on the
product 's data plate label. If you are not sure that your electrical supply meets the
requirements, please consult your local power company for advice.
This product must be connected to a protective earth circuit.
This product is supplied with a plug that has a protective earth pin. This plug will fit
only into an earthed electrical outlet. This is a safety feature. To avoid risk of elec-
tric shock, contact your electrician to replace the electrical outlet if you are unable
to insert the plug into it. Never use an earthed adapter plug to connect the product
to an electrical outlet that lacks an earth connection terminal.
This equipment has been designed to restrict operator access to safe areas only.
Operator access to hazardous areas is restricted with covers or guards, which
would require a tool to remove. Never remove these covers or guards.
Any operator product maintenance procedures will be described in the user docu-
mentation supplied with the product. Do not to carry out any maintenance on this
product, which is not described in the customer documentation.
Before cleaning this product, unplug the product from the electrical outlet. Always
use materials specifically designated for this product; the use of other materials
may result in poor performance and may create a hazardous situation. Do not use
aerosol cleaners; they may be explosive and flammable under certain circum-
stances.
iv

Electrical Supply

WARNING

Operator Accessible Areas

Maintenance

Cleaning Your Product

Safety Notes