Xerox 6030 User Manual page 116

2
3
Setting Up [Paper Width for Special A]
1
88
Enter a positive or a negative number between -99 and +99 to set up the
default print density. Larger negative numbers lighten the prints. Higher
positive numbers darken the prints. The factory default setting is [0].
Press the [Apply] button to save the new setting, [Cancel] to revert to
the existing setting, or [Reset to default] to return to the factory default
setting.
Select [Paper Width for Special A] from the [System parameters] menu.
The Paper Width for Special A selections will display in the right pane.
Chapter 3 Printer Setup