Xerox 6030 User Manual page 147

Example
When the mapping table is set up as shown below, an image with an input size
of A3 will be printed as follows.
Input size
A3
Enlarged
Examples of the Media Sizes that can be output with Media Mapping
It is possible to print out the following paper sizes for the ISO A series.
Output Size
4.3 Logical Printer Print Settings
Media Mapping
Input size Output size
A0
A1
A2
A3
A4
Size Mapping
Size mapping is applied to the image with an input size of A3, which is then
enlarged to an A2 output size (enlarged by 141.4%).
Media mapping is applied as the output size is A2, and the image is printed
on the A1 roll media (rotated by 90 degrees and output).
Output size
A2
A0 A0 roll media
A1 A0 roll media (90-degree rotation), A1 roll media
A2 A1 roll media (90-degree rotation), A2 roll media
A3 A2 roll media (90-degree rotation), A3 roll media
A4 A3 roll media (90-degree rotation)
• It is possible to set paper sizes other than those listed above with media
mapping, but this may result in the images breaking up or the paper being too
large.
Media size
A0 A0
A1 A1
A1 A1
A2 A2
A4 A4
Media source
A2
Rotated by
90 degrees
Printable Paper Size
A1 roll media
119