Automatic Cut Using The Printer Control Panel - Xerox 6030 User Manual

5.10
Automatic Cut Using the Printer Control
Panel
This section describes how to cut the lead edge of the roll media.
Procedure
Print Settings
Media
< > key
Media
Roll1
< > key
Media
Roll2
< > key
Media / Roll2
Type
< > key
Media / Roll2
Trim
< > key
Media / Roll2
Trim : 1
< > key
Media / Roll2
Trim : 2
<Set> key
Media / Roll2
Trim : 2
220
1
2
3
4
5
6
7
8
9
*
Chapter 5 Additional Operations from the Printer Menu
Select [Media] from the menu displayed on
the printer control panel.
Press the < > key.
The level from which the desired media is to
be selected will be displayed.
Press the < > key, and then select the roll
that is to have its lead edge cut.
Press the < > key.
The level from which the setting is to be
selected will be displayed.
Press the < > key and select <Trim>.
Press the < > key.
The level from which the number of cuts is
to be selected will be displayed.
Press the < > key and select either [1], [2]
or [3].
Press the <Set> key.
Press the <Set> key.
The lead edge cutting operation will be
started.