Xerox 6030 User Manual page 36

Powering Off 6030/6050
Switch off the power following the steps below.
Main Power
Switch
Scanner Power
Switch
8
Never switch off the power while the machine is printing. Failure to observe
this precaution may result in paper jams in the high-temperature areas of the
printer.
Circuit Breaker
3
Press power button on Accxes
The 6050A will not operate unless
Accxes controller is ON.
1
Switch OFF the Main Power Switch.
When the remote switch is set to
[Connect], and the Scanner Power
Switch is set to ON, the power to the
Printer and Scanner can be switched
on and off with the Main Power
Switch.
2
Switch OFF the Scanner Power Switch.
Switch off the Circuit Breaker Switch
if the machine will not be used for a
long period of time.
3
Switch the Circuit Breaker Switch to the
OFF position.
®
Controller.