Print Setup Menu; Setting Up Media - Xerox 6030 User Manual

5.9

Print Setup Menu

This section explains the items which can be set up from the [PRINT SETUP]
Menu on the printer control panel.
Media
Tray
Fuser

Setting Up Media

The media type, weight, and size series must be set up whenever you load new
media in the machine or change the type and/or size of the media in the trays or
in the MSI/(Multi Sheet Inserter/Manual Feed Bypass). These settings can be
made at the printer control panel using the Print Setup menu.
5.9 Print Setup Menu
Menu Item
Sets up the type, size, weight, and other
parameters for the media that are loaded in the
machine.
Used to isolate the system from the machine
settings when a fault occurs with optional rolls 3
and 4.
Used to switch the temperature of the fuser.
This menu item, while still present in the 6050A UI
does not have any effect on the fuser operation.
Description
Consult with your Service
Representative before changing this
setting.
Consult with your Service
Representative before changing this
setting.
215