Xerox 6030 User Manual page 56

28
3
Rotate the knob until the media's lead edge
protrudes from the tray outlet.
4
Pull the lever to open the tray cover.
5
Rotate the knob until the paper passes
through the tray outlet.
6
Grasping the cutter by the handle, slide the
cutter to the opposite side of the tray to cut
the paper.
CAUTION: Use the cutter handle to
prevent personal injury which may
result from sliding your fingers along the
sharp, metal cutting bar.
7
Remove the media that was cut off.
8
Close the tray cover.