Xerox 6030 User Manual page 104

2
3
76
Select the interface or protocol ([TCP/IP], [Serial], [Centro], [VPI],
[SNMP]) to be set up from the [System parameters] menu.
The setup selections will display in the right-hand pane of the window.
In the example below, [Serial] has been selected.
• Only standard features and installed options are listed in the [System
parameters] menu. [VPI] and/or [Centro] will be listed if one or both of
these options is installed.
• Refer to the section " Communication Parameters Definitions" in "3.1
Communication Parameters" for more information about the
communication parameter entries.
Set up each of the parameters as required, and then select the [Apply]
button.
Chapter 3 Printer Setup