Xerox 6030 User Manual page 115

3
Setting Up [Replot]
1
2
3
Setting Up [Print Density]
1
3.8 System Parameter Setup (Print Services on Web, 6030/6050)
Press the [Apply] button to save the new setting, [Cancel] to revert to
the existing setting, or [Reset to default] to return to the factory default
setting.
Select [Replot] from the [System parameters] menu.
The Replot setup selections will display in the right pane.
The parameter is enabled by default. De-select the checkbox to disable the
feature. Disabling the feature will render the reprinting function inoperative.
Press the [Apply] button to save the new setting, [Cancel] to revert to
the existing setting, or [Reset to default] to return to the factory default
setting.
Select [Print density] from the [System parameters] menu.
The Print density selections will display in the right pane.
87