Inserting The Flow Sensor - Dräger Fabius OS Instructions For Use Manual

1 Connect the ventilation hose to the ventilator
and
2 attach it to the conical connector ventilator port
on the Compact Breathing System.
If the Fabius OS is equipped with a threaded con-
nector, the sealing rings on the threaded connector
must be undamaged and clean.
Only hand-tighten the threaded connector. Do not
use tools.

Inserting the Flow Sensor

Unscrew and remove the expiration port and
the flow-sensor guard (flow sensor protection)
3 Insert the flow sensor.
4 Reinstall the flow guard.
5 Reinstall the expiration port.
Instructions for Use Fabius OS SW 3.n
1
5 3
4
Assembly
2
45