Adding A Time Frame - NEC Electra Elite IPK II Pc Programming Manual

Electra Elite IPK II
Standard View
Extensions
Lists which extensions are members of the selected Night Mode Service Group.
These settings are linked with 12-05.
8.0.1

Adding a Time Frame

To add a time frame in a Schedule Pattern complete the following:
Figure 14 Standard View - Night Mode Switching Adding Time Frame
1. On the Schedule Pattern bar, using the mouse, left click and drag from
the starting time toward the end time. A colored bar appears defining
this time frame. Keep the left mouse button down while dragging.
2. Release the left mouse button. A dialog then prompts for the Night
Mode associated with this time frame.
3. Select a Night Mode associated with this time frame.
4. The colored bar changes its color depending on the Night Mode
defined.
Each mode is assigned a different color. These colors are shown in
Figure 15 Standard View - Night Mode Switching Mode
Document Revision 1
Colors.
23