Activate/Deactivate Ringer; Activate/Deactivate Battery Warning Tone; Return Handset To Factory Settings - Siemens Gigaset A 200 Manual

Handset settings

Activate/deactivate ringer

All handsets ring to indicate an incoming external call. You can deactivate the ringer on
your handset permanently or just for the current call. This can be done in the idle status
or during an incoming call before it is accepted.
i

Activate/deactivate battery warning tone

With the function activated (default setting: on) you will be informed by an acoustic sig-
nal that the battery is almost flat.
[_______________]
MENU
either ...
or ...

Return handset to factory settings

You can return individual settings and changes to the original factory (default) settings.
Entries in the directory, the caller list and network access list as well as registration of
the handset with the base station remain unchanged.
[_______________]
MENU
[______________________________________________] [__________]
RESET ?
40
Deactivating the ringer permanently:
Press the star key until the ringer can no longer be
heard. The ringer is now permanently switched off.
The symbol
Reactivating the ringer:
Hold down the star key in idle mode or during an
incoming call before it is accepted.
To deactivate the ringer for the current call, open the MENU and
confirm SILENT with OK.
Press display key to open menu.
Deactivate battery warning:
Press keys
Activate battery warning:
Press keys
Press display key to open menu.
Use the keys
Confirm safety check.
OK
Ú
appears in the display.
O 4 Q
.
O 4 1
.
O I
to call up the procedure.