Electronics Line 3000 iConnect Installation Manual page 33

3 Basic System Operation
3.12.5. Remote Arming/Disarming via DTMF
Using the Telecontrol feature, you can arm and disarm the system via the telephone with DTMF commands. For
further information on the Telecontrol features, see p. 38, 5.1.5 Arm/Disarm DTMF Commands.
3.12.6. Remote Arming/Disarming via WUAPP
You can arm and disarm the system remotely using the WUAPP (Web User Application) – see p. 121, Arm/Disarm.
3.12.7. Alarm Activation
In the event of an emergency, the user can generate three kinds of alarms from the front panel keypad, hardwire LCD
keypads, keyfobs, and the EL-2724 Wireless Terminal.
To activate an SOS Panic alarm from the front panel keypad
and Wireless Terminal:
Press and hold down the Home Automation
On and Off buttons simultaneously.
To activate an SOS Panic alarm from the LCD keypad:
Press and hold down the
simultaneously.
To activate a SOS Panic alarm from the LED Top cover:
Press the Service Call and Message Play
buttons simultaneously.
To activate a SOS Panic alarm from the Keyfob EL-2714:
Press B1 and B2 buttons simultaneously.
To activate a Fire alarm from the front panel keypad or
hardwire LCD keypad:
Press and hold down buttons 1 and 3
simultaneously.
To activate a Medical alarm from the front panel keypad or
hardwire LCD keypad:
Press and hold down buttons 4 and 6
simultaneously.
iConnect Installation Manual
and buttons
Figure 3-10: SOS Alarm Activation (Front Panel
Keypad/Wireless Terminal)
Figure 3-11: SOS Alarm Activation (Hardwire LCD Keypad)
Figure 3-12: SOS Panic Alarm Activation (LED Top Cover)
Figure 3-13: SOS Panic Alarm Activation (EL-2714)
Figure 3-14: Fire Alarm Activation
Figure 3-15: Medical Alarm Activation
27