Electronics Line 3000 iConnect Installation Manual page 29

3 Basic System Operation
3.10.2. Arming Keys
The Arming keys enable you to arm the system using any of the three arming methods: -- Full, Part and Perimeter.
Figure 3-7: Arming Keys
3.10.3. Full Arming
Full arming is designed for when the occupant vacates the premises.
To fully arm the system using the front panel keypad, LCD keypad, or EL-2724 Wireless Terminal:
1. Check if the system is ready to arm.
2. Press the Full arming key on the keypad.
3. If One-Key Arming is disabled, enter your user code.
3.10.4. Part Arming
Part arming is designed for when the occupant intends to remain inside one part of the premises and secure another part.
To partially arm the system using the front panel keypad or EL-2724 Wireless Terminal:
1. Check if the system is ready to arm.
2. Press the Part arming key on the keypad.
3. If One-Key Arming is disabled, enter your user code.
To partially arm the system using the hardwire LCD keypad:
1. Check if the system is ready to arm.
2. Press PART on the keypad.
3. Select Part arming.
4. If One-Key Arming is disabled, enter your user code.
3.10.5. Perimeter Arming
Perimeter arming is designed for when the occupant intends to remain inside the premises and secure the perimeter.
To arm the system's perimeter using the front panel keypad or EL-2724 Wireless Terminal:
1. Check if the system is ready to arm.
2. Press the Perimeter arming key on the keypad.
3. If One-Key Arming is disabled, enter your user code.
To arm the system's perimeter using the hardwire LCD keypad:
1. Check if the system is ready to arm.
2. Press PART on the keypad
3. Select Perimeter arming.
4. If One-Key Arming is disabled, enter your user code.
3.10.6. Combination Arming
The system allows you to activate a combination of two arming methods. If you Perimeter arm the system, you may
also activate Full or Part arming. Likewise, you can Perimeter arm the system after activating Full or Part arming. It is
not important which arming mode you choose first.
Note: You can activate the second arming mode only during the exit delay of the first arming mode. When
the first exit delay expires, you cannot activate a second arming mode.
iConnect Installation Manual
Full / Part / Perimeter
23