Mechanical Specifications - HPE Apollo 4200 Gen10 Plus Maintenance And Service Manual

Standard operating support Standard operating support
10° to 35°C (50° to 95°F) at sea level with an altitude derating of 1.0°C per every 305 m (1.8°F per every 1000 ft) above sea level up to
a maximum of 3050 m (10,000 ft), no direct sustained sunlight. Maximum rate of change is 20°C/hr (36°F/hr). The upper limit and rate
of change may be limited by the type and number of options installed.
System performance during standard operating support may be reduced if operating with a fan fault or above 30°C (86°F).
For certain approved hardware configurations, the supported system inlet temperature range is extended:
5°C to 10°C (41°F to 50°F) and 35°C to 40°C (95°F to 104°F) at sea level with an altitude derating of 1.0°C per every 175 m (1.8°F
per every 574 ft) above 900 m (2,953 ft) to a maximum of 3,050 m (10,000 ft).
40°C to 45°C (104°F to 113°F) at sea level with an altitude derating of 1.0°C per every 125 m (1.8°F per every 410 ft) above 900 m
(2,953 ft) to a maximum of 3,050 m (10,000 ft).
The approved hardware configurations for this system are listed on the Hewlett Packard Enterprise website
(http://www.hpe.com/servers/ASHRAE http://www.hpe.com/servers/ASHRAE).

Mechanical specifications

Mechanical specifications
Specification Specification
Height
Depth
Width
Weight (approximate values)
24-bay LFF drive models (12 LFF in drive cage 1 and 12 LFF in
drive cage 2)
Without the 4 LFF or 8 SFF drive cage 3 option, minimum
Without the 4 LFF or 8 SFF drive cage 3 option, maximum
With the 4 LFF or 8 SFF drive cage 3 option, minimum
With the 4 LFF or 8 SFF drive cage 3 option, maximum
Without the two-bay SFF drive cage 4 option, minimum
Without the two-bay SFF drive cage 4 option, maximum
With the two-bay SFF drive cage 4 option, minimum
With the two-bay SFF drive cage 4 option, maximum
Without the two-bay SFF drive cage 4 and two-bay SFF drive cage
5 options, minimum
Without the two-bay SFF drive cage 4 and two-bay SFF drive cage
5 options, maximum
With the two-bay SFF drive cage 4 and two-bay SFF drive cage 5
options, minimum
With the two-bay SFF drive cage 4 and two-bay SFF drive cage 5
options, maximum
48-bay SFF drive models (24 SFF in drive cage 1 and 24 SFF in
drive cage 2)
Value Value
87.50 mm (3.44 in)
837.90 mm (33.00 in)
448.0 mm (17.63 in)
—
—
18.80 kg (41.45 lb)
41.56 kg (91.64 lb)
20.21 kg (44.56 lb)
45.35 kg (100.00 lb)
20.21 kg (44.56 lb)
45.35 kg (100.00 lb)
20.86 kg (46.00 lb)
46.75 kg (103.08 lb)
20.21 kg (44.56 lb)
45.35 kg (100.00 lb)
21.59 kg (47.61 lb)
48.35 kg (106.61 lb)
—
HPE Apollo 4200 Gen10 Plus Server Maintenance and Service Guide 73