Displaying Mapping Data For Integer-Type Variables - ICP DAS USA iKAN Series User Manual

4.3.1. Displaying Mapping Data for Integer-type Variables

Most industrial measuring devices use 16-bit integers to convert a value from a data source to a
real physical value, such as the voltage, temperature, or relative humidity, etc. For example, using
the value range -32768 to 36767 to convert to the voltage range -10 V to +10 V. The iKAN series
device is able to perform data mapping to translate an integer value that has been read from a
remote data source to a readable physical value.
For example, the following explains how to configure the data mapping function for an
integer-type variable at address 1.
Note that this example is a continuation of the example given in Section 4.2.2.
1. On the INTEGER page, click the option for address 1, and then click the Adv. Config button
iKAN Series Display User Manual v 1.0.1 Page: 91