3.2.2.1. Using Modbus RTU Command to Configure the iKAN display
Before using the Modbus RTU Command tool, the iKAN display must be set to Modbus
configuration mode. For more information about how to set the iKAN display to Modbus
Configuration Mode, refer to Appendix "A.1. How to set the iKAN display to Modbus Configuration
Mode".
1. Select the Modbus RTU Master option from the Tools menu
2. Select the COM Port and Baud Rate from the respective drop-down menus, and then click the
Open button
iKAN Series Display User Manual
v 1.0.1
Page: 59