Connecting To The Power And Pc - ICP DAS USA iKAN Series User Manual

2.3. Connecting to the Power and PC

The iKAN display includes two standard Ethernet ports (RJ-45) which provide access to the iKAN via
a PC. To configure the iKAN using the PC, you must first establish a connection between the iKAN
and the PC.
1. Connect the AC power to the iKAN
2. Connect the Ethernet cable to the printer port, and then connect the other end of the cable to
an available port on the network router, switch, or hub, as illustrated below
iKAN Series Display User Manual
Hub/Switch
100 ~ 240 VAC
Power Supply
Ethernet Port
v 1.0.1 Page: 30