Increasing The Number Of Decimal Places For The Value Of A Float-Type Variable - ICP DAS USA iKAN Series User Manual

3.1.2.2. Increasing the Number of Decimal Places for the Value of a
Float-type Variable
The number of decimal places to be used for a float-type variable can be set from the FLOAT
VARIABLES page. The offset value is 40128, which means that variable 0 is equal to 40128 and
variable 2 is equal to 40130, and so on.
For more detailed information about how to increase the number of decimal places for the value
of a float-type variable, refer to Section "4.3.2. Displaying a Value with an Increased Number of
Decimal Places for Float-type Variables".
iKAN Series Display User Manual v 1.0.1 Page: 41