Connecting The Ikan To A Network - ICP DAS USA iKAN Series User Manual

2.4. Connecting the iKAN to a Network

The factory default IP address for each iKAN device is 192.168.255.1.
Before integrating an iKAN series display into your network, you should configure the IP, Subnet
Mask, and Gateway addresses for the device by setting the values that are valid for your network
system.
The eSearch Utility has been developed to allow you to search for ICP DAS Ethernet I/O modules
based-on MiniOS7 which are connected to the same subnetwork as the Host PC, and then you can
configure the Ethernet parameters such as the IP Address, Subnet Mask and Gateway.
1. Download the latest version of the eSearch Utility
The eSearch Utility can be obtained from:
https://www.icpdas.com/en/download/index.php?nation=TW&kw=esearch
Default Installation Path:
C:\ICPDAS\eSearch
2. Launch the eSearch utility and click the Search Server button
iKAN Series Display User Manual v 1.1.0 Page: 31