Assembling The Ikan; Installing A Single-Panel Ikan Display - ICP DAS USA iKAN Series User Manual

2.2. Assembling the iKAN

Before installation, ensure that the surface dedicated for installation is suitable for supporting the
weight of the device. We do not recommend soft and fragile surfaces, such as polystyrene foam,
mineral wool, plaster boards, or wooden walls with a thickness of less than 30 mm, etc.

2.2.1. Installing a Single-Panel iKAN Display

Fasten the left and right mounting plates to each side of the iKAN display with the 8/16 screws
supplied.
iKAN-116S/iKAN-124S
iKAN-208
iKAN Series Display User Manual v 1.0.1 Page: 24