Displaying The Value Of A Coil Variable Using Replacement Text - ICP DAS USA iKAN Series User Manual

4.3.3. Displaying the Value of a Coil Variable using Replacement Text

The contents of a coil variable can be either 0 or 1, which is usually used to indicate the status of
the Digital Output, i.e., ON or OFF.
On the COIL page, click the number for the address of the coil variable which you would like to
configure. The configuration area has been populated based on the number of the address
selected.
Change the value
iKAN Series Display User Manual
Modbus Address
Change the color for displaying the value on the iKAN
v 1.1.0
Value of variable
Page: 109