General Information; Foreword; Correct Use; Warranty - Kessel GTF 50 Hz Series Instructions For Installation, Operation And Maintenance

1

General information

1.1

Foreword

Dear Customer,
We are pleased that you have decided to buy a product from Kessel AG. The product you have purchased
has been manufactured and tested in accordance with the latest technical standards. Read these operating
instructions through carefully before initial operation. This is the only way to guarantee safe and economical use
of the product.
These operating instructions contain all the necessary product specifications to guarantee its correct and effective
use. In addition, you will find information about discovering hazards in good time, avoiding repairs and downtimes
and increasing the reliability and service life of the product.
All safety regulations and manufacturer specifications must be fulfilled before operation starts. These operating
instructions supplement and/or extend the existing national regulations concerning accident protection and accident
prevention. These operating instructions must be available to operating staff at all times at the product's installation
location.
1.2

Correct use

KESSEL products comply with the applicable safety regulations and technical standards. If they are not used
correctly, this can result in fatal danger for the user and for third parties. In addition, the product and/or add-on parts
can become damaged or destroyed.
Care must be taken that the product is only operated if it is in perfect technical condition and used correctly. Follow
these operating instructions for this.

1.2.1 Warranty

You can find warranty details in the General Terms and Conditions of KESSEL AG on our website www.kessel.de

1.2.2 Spare parts, additions and conversion work

Only genuine spare parts from the manufacturer may be used for repairs, replacement as well as additions
and conversion work. Only these guarantee maximum service life and safety. These parts have been specially
designed for our products. Unauthorised additions and conversion work or use of non-genuine spare parts can
lead to serious damage to the product and/or serious personal injuries.

1.2.3 Maintenance

The prescribed maintenance and inspection work must be carried out regularly and may only be carried out by
qualified and authorised persons.
Maintenance work and all types of repair work not listed in these operating instructions may only be carried out by
authorised customer services partners of KESSEL AG.

1.2.4 Product damage

Any damage and faults must be eliminated immediately and correctly by specially trained members of staff. The
product may only be operated if it is in perfect technical condition. During the agreed warranty period, the product
may only be repaired by specialist companies.
KESSEL AG retains the right to have the damaged product delivered to the plant for inspection.
General information
32 / 168 V 1.0