Return Delivery - Kessel GTF 50 Hz Series Instructions For Installation, Operation And Maintenance

Beware of humidity!
The penetration of humidity in the cable will render it damaged and useless. You should therefore never dip the
end of the cable into the pumping medium or any other liquid.
Protect the product from direct sunlight, heat, dust and frost. Heat or frost can cause serious damage to
propellers, impellers and coatings!
• The impellers and/or propellers must be rotated at regular intervals. This prevents any seizure of the bearings
and renews the lubricant film on the floating-ring type shaft seals. In the case of products with a gear design,
the rotation prevents any seizure of the gear pinion and renews the lubricant film on the gear pinions.
Beware of sharp edges!
Sharp edges may form on impellers and propellers. Risk of injury! Wear suitable gloves as protection.
4.4

Return delivery

Products that are returned to the plant must be clean and properly packed. Clean means that the product has
been cleaned of soiling and decontaminated if used with hazardous media. The packaging must protect the
product from damage. Please contact the manufacturer before returning the product.
V 1.0
Packaging, transport and storage
43 / 168