Preparing For The Rotor Mounting - HBM T10FH Mounting Instructions

T10FH

4.4 Preparing for the rotor mounting

CAUTION
The rotor is heavy (as much as 148 kg, depending on the measuring
range)! Use a crane or other suitable lifting equipment to lift it out of its
packaging and install it.
When working with the crane, be sure to meet relevant safety require
ments and wear safety boots.
1. Remove the top layer of foam packaging.
Fig. 4.1: T10FH packaging
2. Fasten two equal−length ropes of sufficient bearing strength to the eye
bolts (each of the two ropes must be able to bear the full weight of the ro
tor) and hoist the rotor out of its packaging with the crane (see Fig. 4.2).
A2037−4.0 en
15
HBM