Table of Contents
Advertisement
8
Prevention of accidents
According to prevailing accident prevention regulations, after fitting the T10FH
torque flange a cover must be fitted as follows:
• The cover must not be able rotate.
• The cover shall protect against crushing or cutting and provide protection
against parts that might come loose.
• The cover shall be installed at a safe distance from moving parts or shall
prevent anyone putting their hand inside.
• The cover shall even be fitted if the moving parts are installed in areas to
which persons do not usually have access.
The above regulations may only be disregarded if machine parts are already
sufficiently protected owing to the design of the machine or because other
precautions have been taken.
Guarantee
In the event of a claim, the guarantee can only be considered if the torque
flanges are returned in its original packing.
HBM
T10FH
A2037−4.0 en
Advertisement
Table of Contents
