Preparing For The Rotor Mounting - HBM T40FM Mounting Instructions

16

4.5 Preparing for the rotor mounting

CAUTION
The rotor is very heavy (depending on measuring range: 18kg 0 39kg)!
Use a crane or other suitable lifting equipment to lift it out of its packaging and
install it.
Two eye bolts are screwed into the rotor as transport and mounting aids.
Hook the lifting equipment to these eye bolts as this ensures that the rotor is
lifted horizontally out of the packaging (see Fig 4.1).
Transport and mounting eye bolts
Fig 4.1: Transport and mounting eye bolts on the rotor
1. Lift the rotor out of the packaging, rotate horizontally by 180_, so that
flange B is pointing upwards (see Fig 4.1).
HBM
T40FM
A3276-3.0 en/de