HBM T10FH Mounting Instructions page 16

16
T10FH
Fig. 4.2: Hoist the rotor out of its packaging
3. Place the rotor onto a clean and stable base.
4. Remove one of the eyebolts.
5. Carefully lift the rotor until it hangs freely.
6. Carefully tilt the rotor by lowering it over the flange edge until it rests hori
zontally on both outer flange surfaces (see Fig. 4.3).
CAUTION
Crush hazard. Keep your hands and feet a safe distance away from the
rotor.
HBM A2037−4.0 en