Table of Contents
Advertisement
22
4. Align the antenna and rotor so that the antenna encloses the rotor coaxi
ally. Please observe the permissible alignment tolerances stated in the
specifications.
5. Now fully tighten the screw fitting of the stator housing.
6. Make sure that the gap in the lower antenna
segment area is free of electrically conductive
foreign bodies.
CAUTION
To make sure that they function perfectly, the fan−type lock washers
(A5.3−FST DIN 6798 ZN/galvanized) must be replaced after the antenna
screw fastening has been loosened three times.
HBM
T10FH
Gap
A2037−4.0 en
Advertisement
Table of Contents
