Administrator Rights (Id Level); Content Of The Teds Memory As Defined In Ieee 1451.4 - HBM T10FH Mounting Instructions

T10FH

6.1.3 Administrator rights (ID level)

Administrator rights in relation to TEDS are intended for the sensor manufac
turer.
Different user rights are needed in order to amend the various entries in the
templates, and these rights may differ from one entry to the next within a tem
plate.

6.2 Content of the TEDS memory as defined in IEEE 1451.4

The information in the TEDS memory is organized into areas, which
are prestructured to store defined groups of data in table form.
Only the entered values are stored in the TEDS memory itself. The amplifier
firmware assigns the interpretation of the respective numerical values. This
places a very low demand on the TEDS memory. The memory content is di
vided into three areas:
Area 1:
An internationally unique TEDS identification number (cannot be changed).
Area 2:
The base area (basic TEDS), to the configuration defined in standard
IEEE1451.4. The transducer type, the manufacturer and the transducer serial
number are contained here.
Example:
TEDS content with the identity number for the T10FH/150 kN@m sensor with
serial no. 123456, made in November 2005
TEDS
Manufacturer
Model
Version letter
Version number
Serial number
A2037−4.0 en
HBM
T10FH
123456
31
HBM