Rear; Voltage Supply - Bosch rexroth Automax 100 Operating Instructions Manual

Table of Contents

About this product | Automax 100 | Extension module TS-AC E2-M3-1X

Mini industrial PC (-7KE1)

Bus coupler (-7KE2)

Digital inputs (-3KE1)

Analog inputs (-5KE1)

M12 system connectors

Arrangement of operating equipment of the extension module

5.2.2

Rear

A recessed grip can be found on the rear of the extension module. It can be used as

alternative to the handles on the Front.

The two plastic bars on the sides serve as protector when putting down the module, e.g. on

a table.

Recessed grip

Protector

Rear of the extension module

5.2.3

The voltage supply of the module is established via the 3 safety plugs on the front of the

module. For this, a basic module see table

another extension module is required.

Connection block for voltage supply

Guide pins

Gnurled screws for securing of additional

modules

Handles

Type plate

„Available basic

Bosch Rexroth AG | 05.2021 | DOK-SUPPL*-TS-AC E2-M3-ITRS-EN-P

19/94

modules" as of page [17] or

Table of Contents

Ts-ac e2-m3-1x