Pc Voltage Supply X10 - Bosch Rexroth IndraControl VPB 40.4 Operating Instructions Manual

16/57
Interfaces
Name at the Connection type
housing
USB 3.0 interface
mSATA interface
mPCIe interface
2 slots or 4 slots (see
slots per PC box type" on page
21)

9.2 PC voltage supply X10

The 24 V DC voltage supply for the control cabinet PC is connected via the "X10"
connection.
All voltages internally required are generated without any electrical isolation via
a DC/DC converter. The connection is designed as spring terminal, SPC 5/3-
ST-7,62, 3-pin, grid 7.62 mm. Connect cables to it with the conductor cross-
sections listed in
terminal at X10" on page
Fig. 9-2: 24 V DC connection, X10, pin assignment
Pin Labeling
1 +
2 –
3 U
NOTICE
Ensure that the polarity at the X10 plug and the dimensioning of the fuse are
correct.
Bosch Rexroth AG R911376309_Edition 02
"Available
tab. "Conductor cross-sections permitted for the spring
17.
3
2
1
Function
Supply voltage 24 V
0 V supply voltage
Supply voltage available in front of the UPS (see
"Connecting a UPS" on page
Destruction of the control cabinet PC (fire
hazard)
connection at the X10 plug without additional
external protection
IndraControl VPB 40.4
Connection type Mating connector or cable
(at the device) (from outside)
USB socket, 4-pin, USB plug, 4-pin
type A
mSATA base
mPCIe base
PCI/PCIe PCI/PCIe card
34)
due to polarity
chapter 10.3.2
reversal of the