Cleaning - Aerotech DR500 Operation & Technical Manual

Troubleshooting
5.6.
The DR500 should be wiped with a clean, dry (or slightly damp with water), soft cloth.
Fluids and sprays are not recommended because internal contamination may result in
electrical shorts and/or corrosion. The electrical power must be disconnected from the
DR500 while cleaning. Do not allow cleaning substance to enter DR500 or onto any of
the connectors. Cleaning labels (on the rear panel) should be avoided to prevent erasing
of label information.
5-6
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
DR500 Operation and Technical Manual

Cleaning

Aerotech, Inc.
∇ ∇ ∇
Version 1.6