Cleaning - Aerotech DR300 Operation & Technical Manual

Troubleshooting
5.6.
The DR300 should be wiped with a clean, dry (or slightly damp with water), soft cloth.
Fluids and sprays are not recommended because internal contamination may result in
electrical shorts and/or corrosion. The electrical power must be disconnected from the
DR300 while cleaning. Do not allow cleaning substance to enter DR300 or onto any of
the connectors. Cleaning Labels (Rear Panel) should be avoided to prevent rubbing off
label information.
5-6
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
DR300 Operation and Technical Manual

Cleaning

Aerotech, Inc.
∇ ∇ ∇
Version 1.5