Connector Pinouts; Ac Input Power Connector (J1); Vdc Power Connector (J2); Transformer Interface Connectors (J3, J5) - Aerotech DR500 Operation & Technical Manual

Soft-Start
4.4.
The Soft-Start / Voltage Selector Board contains five interface connectors, described in
the following sections.

4.4.1. AC Input Power Connector (J1)

The pinouts for the AC Input Power connector are listed in Table 4-2.
Table 4-2.

4.4.2. +24 VDC Power Connector (J2)

The pinouts for the +24 VDC connector are listed in Table 4-3.
Table 4-3.

4.4.3. Transformer Interface Connectors (J3, J5)

The pinouts for the Transformer Interface connectors are listed in Table 4-4.
Table 4-4.
NOTE: Transformer colors are referenced to custom Aerotech transformers only (P.N. EAX01010). Do not use with
other transformers.
4-4
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
DR500 Operation and Technical Manual

Connector Pinouts

AC Input Power Connector (J1) Pinouts
Pin Description
1 AC LO
2 AC LO
+24 VDC Power Connector (J2) Pinouts
Pin Description
1 COMMON
2 COMMON
Transformer Interface Connectors (J3, J5) Pinouts
Pin Description
Transformer Thermal Switch
1
(WHT WIRE)
Transformer 0VAC Lead
2
(BLU WIRE)
Transformer 0VAC Lead
3
(GRY WIRE)
Transformer Thermal Switch
4
(WHT WIRE)
Aerotech, Inc.
Pin Description
3 AC HI
4 AC HI
Pin Description
3 +24 VDC
4 +24 VDC
Pin Description
Transformer 100VAC Lead
5
(GRN WIRE)
Transformer 115VAC Lead
6
(BRN WIRE)
Transformer 100VAC Lead
7
(ORN WIRE)
Transformer 115VAC Lead
8
(BLK WIRE)
Version 1.6