Ac Brushless Drive Configuration (As32020 Or As32030); Figure 2-11. As32020 / As32030 Ac Brushless Drive Modules - Aerotech DR500 Operation & Technical Manual

Set Up

2.2.7. AC Brushless Drive Configuration (AS32020 or AS32030)

To configure a slot in the DR500 for an AC brushless drive module (Figure 2-11),
proceed with the following steps:
WARNING
To prevent another drive type from being inadvertently inserted into a slot configured for
another type drive module, the mating drive connector on the motherboard should have a
key (Aerotech part number EAM857 otherwise Schroff #21101-252) inserted into slot A.
Refer to Figure 2-3. Electrical specifications and test points are listed in Table 2-16 and
Table 2-17, respectively.
2-24
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
DR500 Operation and Technical Manual
•
Set jumpers and drive key according to AS32020 / AS32030 Brush Drive
Configuration Table 2-5.
To minimize the risk of electrical shock and bodily injury, ensure that all electrical
power switches are in the off position and disconnect main power for 1 minute before
inserting/removing drive modules or changing jumper configurations.
If the drive is an AS3005 AC brushless, refer to the following section.
Figure 2-11. AS32020 / AS32030 AC Brushless Drive Modules
Aerotech, Inc.
Version 16