Aerotech DR500 Operation & Technical Manual page 10

DR500 Operation and Technical Manual Regulatory Information
DECLARATION OF CONFORMITY
Manufacturer's Name and Address
Aerotech, Inc.
101 Zeta Drive
Pittsburgh, PA 15238-2897
Declares that the product:
Product Name: DR500
Conforms to the following product specifications:
•
•
•
•
•
•
•
and complies with EMC directive 89/336/EEC and 73/23/EEC low voltage directive.
Pittsburgh, PA
March, 1998
General notes concerning the test setup.
This product was tested at Compliance Labs in Middlefield, Ohio on December 16, 1997.
The report number is 1050.
The DR500 was tested with a CE-compliant, class B personal computer and it controlled
four brushless AC motors. The DR500 requires a line filter (Aerotech P/N UFM) to meet
conducted emission requirements. This filter may not be necessary if the DR500 is used
by the OEM in a system that has a line filter.
Not all configurations of the DR500 are CE compliant. Compliant versions are indicated
by the "CE" symbol on the back of the unit.
Version 1.6
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Electrostatic Discharge in accordance with IEC 1000-4-2
as specified by EN50082-2
Electrical Fast Transients in accordance with
IEC 1000-4-3 as specified in EN50082-2
Immunity to radiated electromagnetic fields in accordance
with IEC 1000-4-3 as specified in EN50082-2
Immunity to conducted RF in accordance with EN 501041
Radiated emission in accordance with EN55011; Group 1,
Class A
Conducted Emission in accordance with EN550100;
Group 1, Class A
EN61010-1:93 - safety of electrical equipment for
measurement, control, and laboratory use
David F. Kincel_________________________
Quality Assurance Manager
Alex Weibel__________________________
Engineer Verifying Compliance
∇ ∇ ∇
Aerotech, Inc.
ix