Aerotech DR500 Operation & Technical Manual page 60

DR500 Operation and Technical Manual
Pins 55 - –12V
Pins 56 - –12V/Common
Pin 57 - Mode Control Axis 1
Pin 58 - Mode Control Axis 2
The following four signals are the same user inputs (to the U500/U600 board) that are
available on the I/O bus connector (J11) on the rear of the DR500 chassis. See the
U500/600 manuals for additional information concerning the user inputs.
Pin 59 - User Input 0
Pin 60 - User Input 1
Pin 61 - User Input 2
Pin 62 - User Input 3
The following four signals are the same user outputs that are on the I/O bus connector
(J11) on the rear of the DR500 chassis. Each of these signals are logic-level open-
collector outputs. All outputs go to a logic high state during reset. See the U500/U600
manuals for additional information concerning the user outputs.
Pin 63 - User Output 0
Pin 64 - User Output 1
Pin 65 - User Output 2
Pin 66 - User Output 3
Pin 67 - Mode Control
Axis 3 Input
Pin 68 - Mode Control
Axis 4 Input
Version 1.6
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
This pin may be an input or output. On U500 and U600
ISA controllers, this pin is driven from the –12V from
the ISA bus.
On U500 PCI, this pin may be an input (–12V) to power
the DAC's. See the U500 manual for more information.
On U500/U600 ISA controllers, this pin is driven from
the –12V from the ISA bus.
On the U500 PCI, this pin may be the common for the
DAC's when using an isolated power supply. See the
U500 manual for more information.
This input controls the AS/AM Series of stepper and
brushless drive modules. See the U500 / U600 manuals
for additional information concerning the Mode Control.
Refer to the description for pin 57.
This is the least significant input bit.
description given above.
Refer to the description preceding pin 59.
Refer to the description preceding pin 59.
Refer to the description preceding pin 59.
Refer to the description given above.
Refer to the description preceding pin 63.
Refer to the description preceding pin 63.
Refer to the description preceding pin 63.
Refer to the description for pin 57.
Refer to the description for pin 57.
Aerotech, Inc.
Technical Details
WARNING
WARNING
Refer to the
3-7