As32020 / As32030 Ac Brushless Drive Configuration; Figure 2-11. As32020 / As32030 Ac Brushless Drive Modules - Aerotech DR300 Operation & Technical Manual

Set Up

2.2.8. AS32020 / AS32030 AC Brushless Drive Configuration

To configure a slot in the DR300 for an AC brushless drive module (Figure 2-11),
proceed with the following steps:
Test Point information and Electrical Specifications are provided below (Table 2-16 and
Table 2-17).
WARNING
To prevent another drive type from being inadvertently inserted into slot A, the mating
drive connector on the motherboard should have a key (Aerotech part number EAM857
otherwise Schroff #21101-252) inserted into slot A. Refer to Figure 2-3.
2-24
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
DR300 Operation and Technical Manual
•
Set jumpers and Drive key according to AS32020 / AS32030 Brush Drive
Configuration (Table 2-5).
To minimize the risk of electrical shock and bodily injury, ensure that all electrical
power switches are in the off position and disconnect main power.
If the drive is an AS3005 AC brushless, refer to the following section.
Figure 2-11. AS32020 / AS32030 AC Brushless Drive Modules
Aerotech, Inc.
Version 1.5