Table of Contents
Advertisement
Safety Instructions
Moving Parts
The V650 Flex employs moving mechanical parts which pose the risk of severe personal injury.
Always use extra care when working around the machine. Do not wear ties, loose clothing, or
dangling jewelry. Keep long hair tied up and away from any moving parts.
Moving parts are located inside both the Build Chamber and Vat Enclosure. These areas
should not be opened while any part of the machine is still moving. The Guarding System, if not
disabled, will immediately stop all moving parts when either area is opened. Operators are
prevented from using the system with the Guarding System disabled.
High Voltage
The "High Voltage" warning label indicates the presence of high voltages. Always stay away
from any exposed electrical circuitry. It is recommended that all jewelry be removed before
working around the machine.
High Voltage systems are located inside the Electrical Enclosure. The machine should be
completely powered down before replacing any electrical component.
© Copyright 2020 Stratasys. All rights reserved.
Safety Warnings
Page 4
Advertisement
Table of Contents
