Table of Contents
Advertisement
Loading and Replacing a Vat
3. Open the Phoenix software and click Maintenance. Enter 0.00 in the distance field in the
Vat pane and click Go to... to lower the vat.
4. Wait for the vat to stop moving, and carefully pull the vat out from the vat enclosure.
5. Push the replacement vat into the vat enclosure. Ensure that the vat is centered and that
the heads of the three jacks are under the wedges in the vat's lifting brackets.
6. Access the Maintenance screen and press and hold (vat pane) Move up until the jack
heads just contact the lifting brackets.
Figure 8: Maintenance Screen and Vat Pane
Figure 9: Withdrawing the Vat
© Copyright 2020 Stratasys. All rights reserved.
Powering OFF the Printer
Page 75
Advertisement
Table of Contents
