Table of Contents
Advertisement
Loading and Replacing a Vat
2. Tap Queue. When the job queue screen displays, search for the job file in the Job Queue
and Job Directory panes. See
3. The job file must be at the top of the Job Queue list for the machine to load it and initiate
the build. If the file is at the top of the queue, skip to Step 5, otherwise, continue to the next
step.
4. If the file is in the Job Directory or Job Archive pane (depending on whether the Show
Directory or Show Archive button is active), tap the file to highlight it. Next, tap the arrow
between the panes to move the file to the job queue. The job file should display in the
queue. If the job file is already present in the job queue, the screen will not change.
5. Highlight the file and tap Move To Top to move it to the top of the queue. If the job file was
recently added, it should be at the top of the queue.
6. Tap Back to return to the Home screen.
7. Tap Next Job to load the job file.
8. Check the Status bar and verify that the correct job file was loaded.
Figure
Figure 13: Queue Screen
© Copyright 2020 Stratasys. All rights reserved.
13.
Loading a Job
Page 78
Advertisement
Table of Contents
