Table of Contents
Advertisement
Graphical User Interface
•
Technician
screens.
•
Supervisor
Command Line screen, under the Maintenance button.
Navigation Bar
The Navigation bar for the operator's interface has 2 buttons: Next Job and Queue. An
operator can select a job file, and start, stop, pause, or abort a build. The technicians/
supervisor interface has 4 additional buttons: Edit Job, Build Settings, Machine Settings, and
Maintenance. They allow you to edit the job, build, or machine settings, and access the
Maintenance screen (see
•
Next Job: Loads the next job file from the top of the "Job Queue" pane in the Queue
screen. This button does not cause the screen to change.
•
Queue: Displays the Queue screen. From this screen, select a job file and move it to the
top of the job queue.
•
Edit Job: Displays the Edit Job screen. From this screen, select which components are built
and which are not.
: Provides password-protected access to all settings and maintenance
: Provides password-protected access to all screens except the
Figure 23 (page
Figure 11: Screens Accessible from the Navigation Bar
© Copyright 2020 Stratasys. All rights reserved.
Optowave Laser Control Panel
54)).
Page 45
Advertisement
Table of Contents
