Pps-Picture-In-Picture/Picture-By-Picture Swap; Pst-Picture Setting - Christie DWU1612-HS Technical Reference

Examples
Set the picture-by-picture image on the bottom of the main image:
(PPP 1)
Set the picture-by-picture image on the top-left corner of the image:
(PPP 6)
PPS–Picture-in-Picture/Picture-by-Picture Swap
Swaps the current main and picture-in-picture/picture-by-picture inputs, regardless if valid signals are
on either of the inputs.
Commands
Command Description
PPS Swaps the main and picture-in-picture/picture-by-picture input.
Examples
Swap the main and picture-in-picture/picture-by-picture input.:
(PPS 1)
PST–Picture Setting
Changes the picture-related settings for the current source to a set of predefined values.
Commands
Command Description
PST <value> Optimizes the projector.
PST+USER <value> Stores the current settings to a user profile.
Examples
Optimize the projector for bright viewing content:
(PST 1)
DWU1612-HS/DWU2022-HS Technical Reference–Serial Commands
020-103352-01 Rev. 1 (03-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Serial API commands
Values
—
Values
0 = Video
1 = Bright (Default)
2 = Enhanced
3 = REC709
4 = DICOM SIM
5 = Blending
6 = User
—
55