Apw-Auto Power On; Ash-Auto Shutdown - Christie DWU1612-HS Technical Reference

Examples
Set the timing detection mode to Normal:
(AIG 0)
Set the timing detection mode to Wide:
(AIG 1)
APW–Auto Power On
Automatically turns on the projector when electrical power is connected.
Commands
Command Description
APW <0 | 1> Automatically powers up the projector to the on
state.
Examples
Turn off auto power:
(APW 0)
Turn on auto power:
(APW 1)
ASH–Auto Shutdown
Powers off the projector after a set period of time.
If an active signal is received before the projector powers down, the image is displayed.
Commands
Command Description
ASH <value> Enables or disables auto
shutdown.
DWU1612-HS/DWU2022-HS Technical Reference–Serial Commands
020-103352-01 Rev. 1 (03-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Values
0 = Disables auto power up (Default)
1 = Enables auto power up
Values
0 = Turns off auto shutdown (Default)
1 = Activates auto shutdown after five minutes
2 = Activates auto shutdown after 10 minutes
3 = Activates auto shutdown after 15 minutes
4 = Activates auto shutdown after 20 minutes
5 = Activates auto shutdown after 25 minutes
6 = Activates auto shutdown after 30 minutes
Serial API commands
11