Table of Contents
Advertisement
5. Replaying Event Data
(1) Press the REVIEW key to display the Data Replay menu, use the [
select "Event" for "Data Type", and then press the ENTER key to confirm your setting.
Data Type: Event
Data Replay
Data Type: Event
Block No.: 2
Execute:
1
2
3
9
10 11 12 13 14 15 16
[ENTER] Select/[QUIT] Exit
Use the [
"Execute".
(2) A waveform and cursors are displayed. Use the [
the cursors and read the data.
6. Using the Readout Menu to Move the Cursors
(1) Press the MENU key to display the Readout Menu.
(2) If you use the [
menu, the cursor will move to the end of the data.
(3) Press the QUIT key to close the Data Replay screen.
4
5
6
7
8
] direction keys to select the data capture block for replay, and then select
] direction keys to select "Move to Last Data" in the <Cursor Position>
] or the [
Channel data display
Time data display
between the cursors
Move Cursor Selection Menu
Settings and Measurement
] direction keys to
] direction keys to move
3-9
Advertisement
Table of Contents
