Table of Contents
Advertisement
Software
(2) Select the file to be displayed. The data is displayed on the screen. If waveforms are
displayed, the data can be checked and converted if required.
• The capture Start Time, Capture Time and Capture Interval are displayed at the upper right of the
screen. Moreover, the selected file name is displayed in the upper part of the waveform display.
• Two channel ranges can be displayed for Y Axis. Specify the channels as required.
• Waveform Show/Hide
If a waveform display color within the Trace list is clicked once, the waveform display for that
channel disappears. Click the color once more to redisplay it. Use this function when you need
to distinguish between overlapped waveforms.
• Waveform View Range
A scroll bar is displayed underneath the waveform display to indicate which part of the data is
displayed. Simply move the scroll bar to the required position for fast display of that data.
• Cursor Status
Two cursors, A and B, are displayed. The cursor information for the two selected waveform
channels is displayed at the lower right.
CHECKPOINT
• The cursor status waveform data information displayed will be the information for the channels
specified as the Y Axis Range 1 and 2 channels.
• If Device Memory Data was selected for Review Device, the event data names will be displayed when
Select is clicked on the Display Current/Event screen.
Event Data(1): (1) indicates the Memory Block No.
If data is selected here, that data is displayed.
4-44
Advertisement
Table of Contents
